Descriere

A revolutionary method of temporarily changing the color of the car and other elements. Provides an attractive appearance and effective protection. Protects against scratches, dirt, moisture, diluted acids, corrosion, oils, grease. It is suitable for application to painted elements, steel and aluminum rims, bumpers, wood, metal, glass, plastics and much more. Painted elements can be washed with a sponge and shampoo. The coating has excellent flexibility, does not crack or crumble. It withstands temperatures from -30°C to over 90°C. The applied coating can be easily removed. After manual removal, K2 Color Flex leaves no traces, and the surface is in exactly the same condition as when applied.

How to use:

Painted surfaces must be clean, dry, free of rust and grease.
Shake well for about 3 minutes before use.
Check the effect on the paint in an inconspicuous place.
Apply from a distance of 20-30 cm. To obtain a perfectly smooth, streak-free surface, apply 3 to 5 very thin layers. The time intervals between layers should be approximately 5 minutes, depending on the ambient temperature and the thickness of the applied layers. In critical areas (corners, edges) the coating layer should be thick enough to avoid cracking during removal of the foil.
To remove the wrapper, pull on the edge and then slowly remove the rest with your hand.

Note: Do not apply COLOR FLEX L343CL clear topcoat over a COLOR FLEX colored topcoat (black, red, blue, etc.).

Drying times:

touch resistance 10 min.,
dry to dust 30 min.,
full cure 2 hours EQUIVALENT 9005 matt

INFORMATII_DE_SIGURANTA_K2_COLOR_FLEX_CZARNY_MAT_400_ML-1.pdf (66 downloads )

FISA_DE_PRODUS_K2_COLOR_FLEX_CZARNY_MAT_400_ML.pdf (36 downloads )

Security

SAFETY WARNINGS

Danger: Extremely flammable aerosol. Pressurized container: May explode if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Do not inhale spray. Protect from sunlight. Do not expose to temperatures exceeding 50°C. Repeated exposure may cause skin dryness or cracking. Contains: ethyl acetate; acetone.

MANUFACTURER AND ENTITY RESPONSIBLE FOR PLACING THE PRODUCT ON THE EUROPEAN UNION MARKET

Melle Sp. z o. o., Stary Staw 9, 63-400 Ostrów Wlkp., Poland, EU, +48 62 737 88 00, www.k2.com.pl, www.k2-global.com, info@melle.com